Copolyester
MN021
Manufacturer：东曹化学公司
热塑性缩聚共聚物，可灭菌，环氧乙烷灭菌，伽马射线灭菌，电子束灭菌
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.33 | g/cm³ |
| Tensile strength | 58.0 | MPa |
| Tensile modulus | 2400.0 | MPa |
| Elongation at break | 120.0 | % |
| Flexural modulus | 2500.0 | MPa |
| Notched impact strength | 27.0 | kJ/m² |
| HDT 1.8MPa | 69.0 | °C |
| HDT 0.45MPa | 65.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 150 - 160 °C; time 4 - 6 h. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 275 - 295 °C; mold temperature 10 - 30 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: medical. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 1
- Drying time：page 1
- Melt temperature：page 1
- Mold temperature：page 1
- Application areas：page 1
