LCP
VECTRA® E130i LCP-GF30
Manufacturer：塞拉尼斯
高温能力，流动性最佳，适用于需要非常薄壁的情况，适用于广泛的SMT应用，尺寸变化最小，固有阻燃性，符合FDA标准，自然色和黑色在0.2mm厚度下UL94火焰测试V-0级，根据UL 746B的相对温度指数（RTI）：电气240°C，机械240°C在0.75mm
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.61 | g/cm³ |
| Tensile strength | 160.0 | MPa |
| Tensile modulus | 16000.0 | MPa |
| Elongation at break | 1.6 | % |
| Notched impact strength | 38.0 | kJ/m² |
| HDT 1.8MPa | 270.0 | °C |
| HDT 0.45MPa | 216.0 | °C |
| Vicat softening point | 195.0 | °C |
| Flame rating | V-0 | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.
- Storage
- Confirm packaging, temperature and humidity, shelf life, and handling after opening.
- Drying
- Confirm whether drying is required, plus temperature, time, dew point and target moisture.
- Equipment setup
- Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
- Applications
- Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.
You may consult the family overview; it does not provide verified settings for this grade: Material-family guide
