Polyamide 6 (PA6) with 30% glass fiber
PA6-GF30_Armamid® PA6 GF 30-2HSM_Polyplastic_1
Manufacturer：R&P Polyplastic
高机械和电气性能，对烃类（煤油、汽油、苯等）、矿物油和合成油、强弱碱、弱酸有良好的抗性
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.36 | g/cm³ |
| Melt flow rate | 2.16 | g/10min |
| Tensile strength | 160.0 | MPa |
| Elongation at break | 4.9 | % |
| Notched impact strength | 13.0 | kJ/m² |
| HDT 1.8MPa | 217.0 | °C |
| HDT 0.45MPa | 204.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.
- Storage
- Confirm packaging, temperature and humidity, shelf life, and handling after opening.
- Drying
- Confirm whether drying is required, plus temperature, time, dew point and target moisture.
- Equipment setup
- Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
- Applications
- Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.
