PA6-MX
B FR H CET/30-V0
Manufacturer：凯龙
{'processing': '注塑成型', 'additives': '阻燃剂', 'special_characteristics': '耐热稳定', 'regional_availability': '欧洲'}
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.6 | g/cm³ |
| Tensile strength | 55.0 | MPa |
| Tensile modulus | 6400.0 | MPa |
| Elongation at break | 1.6 | % |
| Notched impact strength | 2.7 | kJ/m² |
| HDT 1.8MPa | 145.0 | °C |
| HDT 0.45MPa | 195.0 | °C |
| Vicat softening point | 185.0 | °C |
| Flame rating | {'GWFI': 960, 'GWFI_thickness_tested_1': 1, 'GWFI_thickness_tested_2': 2, 'UL_94_Flame_rating': 'V-2', 'Thickness_tested': 0.75} | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 90 - 100 °C; time 3 h. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 240 - 260 °C; mold temperature 70 - 100 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 1
- Drying time：page 1
- Melt temperature：page 1
- Mold temperature：page 1
