PA610-GF15_Bergamid™ NI-15GF000 FR GR002

PA610-GF15_Bergamid™ NI-15GF000 FR GR002

Manufacturer:Not recorded

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.49g/cm³
Tensile strength95.0MPa
Flexural strength140.0MPa
Flexural modulus5500.0MPa
Notched impact strength60.0kJ/m²
HDT 1.8MPa195.0°C
Flame ratingFlame retardant—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 80 - 90 °C; time 4 - 6 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 260 - 280 °C; mold temperature 65 - 85 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1