PA66+PA6-GF25

PA66+PA6-GF25 1 FR black 7246

Manufacturer:Not recorded

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.37g/cm³
Tensile strength137.0MPa
Tensile modulus9100.0MPa
Elongation at break3.0%
Flexural strength225.0MPa
Flexural modulus8800.0MPa
Notched impact strength11.0kJ/m²
HDT 1.8MPa225.0°C
HDT 0.45MPa251.0°C
Flame rating{'V-0': '*', 'class': '*', 'thickness_tested': '1.6', 'mm': '-', 'Yellow_Card_available': 'yes'}—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
No drying value was confirmed by extraction; review the source.
Equipment setup
Candidate injection-molding recommendations: melt temperature 300 °C; mold temperature 90 °C. Verify the source, grade and conditions.
Applications
Candidate application areas in the source: automotive. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Melt temperature:page 1
  • Mold temperature:page 1
  • Application areas:page 2