PA66+PA6
PA66+PA6_LATAMID 66 B H-V0
Manufacturer：LATI工业热塑性塑料公司
{'flame_retardant': '阻燃', 'halogen_free': '无卤', 'phosphorus_free': '无磷', 'heat_stabilized': '耐热稳定'}
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.16 | g/cm³ |
| Tensile strength | 80.0 | MPa |
| Tensile modulus | 3800.0 | MPa |
| Elongation at break | 8.0 | % |
| Notched impact strength | 3.0 | kJ/m² |
| HDT 1.8MPa | 90.0 | °C |
| HDT 0.45MPa | 235.0 | °C |
| Vicat softening point | 240.0 | °C |
| Flame rating | {'GWFI': 960, 'GWFI_thickness_tested_1': 1, 'GWFI_thickness_tested_2': 2, 'UL_94_Flame_rating': 'V-0', 'Thickness_tested': 0.75, 'Limiting_Oxygen_Index': 32} | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 90 - 100 °C; time 3 h. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 265 - 275 °C; mold temperature 70 - 100 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 1
- Drying time：page 1
- Melt temperature：page 1
- Mold temperature：page 1
