Polyamide 66 (PA66) + Polytetrafluoroethylene (PTFE)

PA66/3A/2L1

Manufacturer:Not recorded

注塑成型

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.23g/cm³
Tensile strength85.0MPa
Elongation at break6.0%
Flexural strength110.0MPa
Flexural modulus3800.0MPa
Notched impact strength4.8kJ/m²
HDT 1.8MPa195.0°C
Flame rating{'HB_class': 'HB', 'thickness_tested': '3.0 mm', 'GWFI': '650 °C', 'GWFI_thickness_tested': '1.6 mm', 'GWIT': '650 °C', 'GWIT_thickness_tested': '1.6 mm'}—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 80 °C; time 3 - 5 h; processing moisture ≤0.1 %. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 275 - 295 °C; mold temperature 60 - 95 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Processing moisture:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1