Recorded properties

Record date：2026-11-07

Property	Value	Unit
Density	1.27	g/cm³
Tensile strength	315.0	MPa
Tensile modulus	27000.0	MPa
Flexural modulus	23000.0	MPa
Notched impact strength	12.0	kJ/m²
HDT 1.8MPa	250.0	°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage: Review the source for packaging, storage and opened-package instructions.
Drying: Candidate injection-molding recommendations: temperature 75 °C; time 6 - 16 h; processing moisture ≤0.1 %. Verify the source, grade and conditions.
Equipment setup: Candidate injection-molding recommendations: melt temperature 290 °C; mold temperature 90 - 120 °C. Verify the source, grade and conditions.
Applications: Candidate application areas in the source: automotive, electrical and electronics. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

Drying temperature：page 1
Drying time：page 1
Processing moisture：page 1
Melt temperature：page 1
Mold temperature：page 1
Application areas：page 1