PA66

A700 G30 H RED 3000 (F1)

Manufacturer:贝加米德™

耐热稳定或对热稳定

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.35g/cm³
Tensile strength165.0MPa
Tensile modulus9500.0MPa
Elongation at break3.0%
Notched impact strength7.0kJ/m²
HDT 1.8MPa75.0°C
Flame ratingHB—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
No drying value was confirmed by extraction; review the source.
Equipment setup
Candidate injection-molding recommendations: melt temperature 280 - 300 °C; mold temperature 50 - 90 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Melt temperature:page 1
  • Mold temperature:page 1