PA66-GF33

PA66-GF33

Manufacturer:Not recorded

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.4g/cm³
Tensile strength165.0MPa
Elongation at break5.0%
Flexural modulus9650.0MPa
Notched impact strength100.0kJ/m²
HDT 1.8MPa263.0°C
HDT 0.45MPa254.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: processing moisture ≤0.1 %. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: mold temperature 66 - 82 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Processing moisture:page 1
  • Mold temperature:page 1