PA66 (聚酰胺66) 纤维增强型

PA66-GF40_Nymax™ GF 1200 A 40 IM Black 13A

Manufacturer:安费诺公司

高冲击改性

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.47g/cm³
Tensile strength187.0MPa
Elongation at break6.0%
Flexural modulus11000.0MPa
Notched impact strength120.0kJ/m²
HDT 1.8MPa246.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 82.2 °C; time 4 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: mold temperature 60 - 107 °C. Verify the source, grade and conditions.
Applications
Candidate application areas in the source: automotive, construction. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Mold temperature:page 1
  • Application areas:page 1