PA66
PA66-GF43 Vydyne® R543H Natural
Manufacturer：Ascend
高冲击或冲击改性，耐热或对热稳定
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.5 | g/cm³ |
| Tensile strength | 225.0 | MPa |
| Tensile modulus | 14800.0 | MPa |
| Elongation at break | 3.0 | % |
| Flexural strength | 340.0 | MPa |
| Flexural modulus | 12500.0 | MPa |
| Notched impact strength | 14.0 | kJ/m² |
| HDT 1.8MPa | 252.0 | °C |
| HDT 0.45MPa | 260.0 | °C |
| Flame rating | {'UL_94_Flame_rating': 'HB', 'Glow_Wire_Flammability_Index_(GWFI)': {'thickness_tested_0_75_mm': 675, 'thickness_tested_1_5_mm': 675, 'thickness_tested_3_mm': 960}, 'Glow_Wire_Ignition_Temperature_(GWIT)': {'thickness_tested_0_75_mm': 700, 'thickness_tested_1_5_mm': 700, 'thickness_tested_3_mm': 750}, 'Oxygen_index': 25} | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 80 °C; time 4 h. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 285 - 305 °C; mold temperature 65 - 95 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: automotive. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 2
- Drying time：page 2
- Melt temperature：page 2
- Mold temperature：page 2
- Application areas：page 2
