Looking for a reliable supplier or an alternative grade? Tell us what you need

PA66

A3 G50 HS UV RH PRTA011 NR416

Manufacturer:Nypol®

U.V. stabilized or stable to weather, Heat stabilized or stable to heat

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.56g/cm³
Flexural strength320.0MPa
Flexural modulus14800.0MPa
Notched impact strength18.0kJ/m²
Vicat softening point254.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 90 °C; time 4 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 270 - 290 °C; mold temperature 100 - 110 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1