PA66-GF

PA66-GF LATAMID 66 H2 G25-V0KB4

Manufacturer:Not recorded

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.33g/cm³
Tensile strength110.0MPa
Tensile modulus6800.0MPa
Elongation at break2.2%
Notched impact strength13.0kJ/m²
HDT 1.8MPa235.0°C
HDT 0.45MPa255.0°C
Vicat softening point235.0°C
Flame rating{'GWFI': '960 °C', 'GWFI_thickness_tested_1': '1 mm', 'GWFI_thickness_tested_2': '2 mm', 'GWIT': '775 °C', 'GWIT_thickness_tested_1': '1 mm', 'GWIT_thickness_tested_2': '2 mm', 'UL_94_Flame_rating': 'V-0', 'Thickness_tested': '0.75 mm', 'Limiting_Oxygen_Index': '27 %'}—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 90 - 100 °C; time 3 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 270 - 290 °C; mold temperature 70 - 100 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1