PA66
AKROMID® A3 1 FR black (3051)
Manufacturer：Akro-Plastic GmbH
阻燃，无卤，耐热或耐高温
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.18 | g/cm³ |
| Tensile strength | 83.0 | MPa |
| Tensile modulus | 3500.0 | MPa |
| Notched impact strength | 4.5 | kJ/m² |
| HDT 1.8MPa | 80.0 | °C |
| HDT 0.45MPa | 220.0 | °C |
| Flame rating | {'V-0': 'class', 'Oxygen index': '32 %', 'Glow Wire Flammability Index (GWFI)': '960 °C', 'Glow Wire Ignition Temperature (GWIT)': '750 °C'} | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- No drying value was confirmed by extraction; review the source.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 320 °C; mold temperature 100 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: electrical and electronics. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Melt temperature：page 1
- Mold temperature：page 1
- Application areas：page 1
