PA66

A3 black (4432)

Manufacturer:Not recorded

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.14g/cm³
Tensile strength85.0MPa
Tensile modulus3000.0MPa
Flexural strength110.0MPa
Flexural modulus2800.0MPa
Notched impact strength7.5kJ/m²
HDT 1.8MPa65.0°C
HDT 0.45MPa210.0°C
Flame rating{'V-2': 'class', 'thickness_tested': '1.6 mm', 'oxygen_index': '26 %', 'glow_wire_flammability_index_gwfi': '700 °C', 'gwfi_thickness_tested_1': '1.6 mm'}—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
No drying value was confirmed by extraction; review the source.
Equipment setup
Candidate injection-molding recommendations: melt temperature 320 °C; mold temperature 100 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Melt temperature:page 1
  • Mold temperature:page 1