PA6
B730 P
Manufacturer：普米德
共聚物，通用化学抗性
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.15 | g/cm³ |
| Tensile strength | 50.0 | MPa |
| Tensile modulus | 2900.0 | MPa |
| Elongation at break | 1.9 | % |
| Flexural strength | 112.0 | MPa |
| Flexural modulus | 2800.0 | MPa |
| Notched impact strength | 6.8 | kJ/m² |
| HDT 1.8MPa | 60.0 | °C |
| HDT 0.45MPa | 60.0 | °C |
| Flame rating | {'GWFI': '800', 'GWIT': '825', 'thickness_tested': '1.5'} | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature <80 °C; time 4 - 6 h. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 210 - 290 °C; mold temperature 0 - 80 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 1
- Drying time：page 1
- Melt temperature：page 1
- Mold temperature：page 1
