Looking for a reliable supplier or an alternative grade? Tell us what you need

Injection Molding, 45% Glass Reinforced, UV Stabilized, Excellent Surface Properties

Pocan® T7391 900044 POS151

Manufacturer:Not available in English

ISO 1043 (PBT+PET)-GF45

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.69g/cm³
Melt flow rate30.0g/10min
Tensile strength160.0MPa
Tensile modulus16000.0MPa
Elongation at break1.9%
Notched impact strength10.0kJ/m²
HDT 1.8MPa205.0°C
HDT 0.45MPa225.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 120 °C; time 4 - 8 h; processing moisture ≤0.02 %. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 260 - 280 °C; mold temperature 80 - 100 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 2
  • Drying time:page 2
  • Processing moisture:page 2
  • Melt temperature:page 2
  • Mold temperature:page 2