Looking for a reliable supplier or an alternative grade? Tell us what you need

PBT

LATER 4 G/30-V0

Manufacturer:Not available in English

{'Processing': 'Injection Molding', 'Additives': 'Flame retarding agent', 'Regional_Availability': 'Europe'}

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.58g/cm³
Tensile strength120.0MPa
Tensile modulus9500.0MPa
Elongation at break2.3%
HDT 1.8MPa205.0°C
HDT 0.45MPa215.0°C
Vicat softening point205.0°C
Flame rating{'GWFI': 960, 'GWFI_thickness_tested_1': 1, 'GWFI_thickness_tested_2': 2, 'UL_94_Flame_rating': 'V-0', 'Thickness_tested': 0.75}—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 110 - 130 °C; time 3 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 240 - 250 °C; mold temperature 70 - 90 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1