30% glass fibre reinforced PBT with post consumer PET

SCHULADUR® PCR GF30

Manufacturer:Not recorded

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.55g/cm³
Melt flow rate20.0g/10min
Tensile strength142.0MPa
Tensile modulus10800.0MPa
Elongation at break2.1%
Flexural strength209.0MPa
Flexural modulus10820.0MPa
Notched impact strength9.0kJ/m²
HDT 1.8MPa205.0°C
HDT 0.45MPa225.0°C
Vicat softening point204.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 120 °C; time 2 - 4 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 255 - 270 °C; mold temperature 80 - 90 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 2
  • Drying time:page 2
  • Melt temperature:page 2
  • Mold temperature:page 2