FR(40)
Bayblend® FR3011
Manufacturer：科思创
阻燃，易流动，良好的耐热性，良好的光稳定性
Recorded properties
Record date：2026-11-07
| Property | Value | Unit |
|---|---|---|
| Density | 1.19 | g/cm³ |
| Melt flow rate | 17.0 | g/10min |
| Tensile strength | 65.0 | MPa |
| Tensile modulus | 2600.0 | MPa |
| Elongation at break | 4.0 | % |
| HDT 1.8MPa | 98.0 | °C |
| HDT 0.45MPa | 108.0 | °C |
| Vicat softening point | 116.0 | °C |
| Flame rating | {'UL_recognition_94_V_0': '1.5 mm', 'glow_wire_temperature_GWFI': '960 °C at 2.0 mm', 'V_0_class': '1.5 mm', '5VB_class': '2.0 mm', 'oxygen_index': '32 %'} | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 100 - 110 °C; time 2 - 4 h; processing moisture ≤0.02 %. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 240 - 280 °C; mold temperature 70 - 100 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature：page 2
- Drying time：page 2
- Processing moisture：page 2
- Melt temperature：page 2
- Mold temperature：page 2
