EMERGE™ PC/ABS 7590

EMERGE™ PC/ABS 7590

Manufacturer:Not recorded

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.17g/cm³
Melt flow rate17.0g/10min
Tensile strength62.1MPa
Elongation at break50.0%
Flexural strength97.9MPa
Flexural modulus2827.0MPa
Notched impact strength641.0kJ/m²
HDT 1.8MPa93.9°C
HDT 0.45MPa82.2°C
Vicat softening point108.0°C
Flame ratingV-0—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 79.4 - 90.6 °C; time 3 - 4 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 220 - 250 °C; mold temperature 60 - 90.6 °C. Verify the source, grade and conditions.
Applications
Candidate application areas in the source: electrical and electronics. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1
  • Application areas:page 1