HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
TP8HPN
制造商:
None
Injection Molding, Other Extrusion
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TP7LDZ
制造商:
克劳斯伯尔TPE有限公司
No Characteristics
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOLAST® M TM3ADT
制造商:
None
No Characteristics
Physical Properties
Density
0.93
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TM3MED
制造商:
克劳斯贝格TPE有限公司
Adhesion to PP und HDPE, Adapted for injection moulding and extrusion, Very good compression set, sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Physical Properties
Density
0.88
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Adhesion to PP und HDPE, Adapted for injection moulding and extrusion, Very good compression set, sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOLAST® K TP7SKZ
制造商:
None
Injection Molding, Other Extrusion
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOLAST® K TP7VCN
制造商:
克拉伯格TPE有限公司
Injection Molding, Other Extrusion
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOLAST® M TM3RST TPE
制造商:
None
Injection Molding, Other Extrusion Medical Grade, Biocompatibility
Physical Properties
Density
0.89
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion Medical Grade, Biocompatibility
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOLAST® K TP9LDZ
制造商:
None
Injection Molding, Other Extrusion
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOLAST® K TP8CDB
制造商:
None
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TP9CDB
制造商:
克来堡TPE公司
No Characteristics
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOLAST® K TP6SKZ
制造商:
None
Good Adhesion, Weldable
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOLAST® K TP6HPN
制造商:
克劳斯宝格TPE有限公司
Injection Molding, Other Extrusion
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TP6CDB
制造商:
None
Good Adhesion, Weldable
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TP5CDZ
制造商:
None
Good Adhesion, Weldable
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOLAST® K TP5SKZ
制造商:
None
Injection Molding, Other Extrusion
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TP6CDZ
制造商:
None
Good Adhesion, Weldable
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TP5HPG
制造商:
特罗尔玛® K
Good Adhesion, Weldable
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOLAST® K TP5VCN
制造商:
None
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOLAST® K TP5CDE
制造商:
None
Good Adhesion, Weldable
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOLAST® K TP3CDZ
制造商:
None
Good Adhesion, Weldable
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more