HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66 A 2040100.01 GF40
Manufacturer:
improved surface appearance,heat stabilised,high stiffness,injection moulding grade
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved surface appearance,heat stabilised,high stiffness,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2035/507 GF35 EF
Manufacturer:
ALTECH
hot oil resistant,improved surface appearance,easy release (demoulding),easy flow,heat stabilised
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
hot oil resistant,improved surface appearance,easy release (demoulding),easy flow,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2033/500 GF33
Manufacturer:
hot oil resistant,improved surface appearance,easy release (demoulding),easy flow,heat stabilised
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
hot oil resistant,improved surface appearance,easy release (demoulding),easy flow,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 3240100 GK25 GF15
Manufacturer:
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 3240100 GK25 GF15
Manufacturer:
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ A0210
Manufacturer:
No Characteristics
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ AG213
Manufacturer:
Injection Molding
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8 GF10 MR20 IM
Manufacturer:
heat stabilised,low warpage,improved surface appearance,impact modified
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,low warpage,improved surface appearance,impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2035/509 GF35 LV
Manufacturer:
ALTECH
easy release (demoulding), good flow, improved surface appearance
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy release (demoulding), good flow, improved surface appearance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2035/509 GF35
Manufacturer:
ALTECH
easy release (demoulding),good flow,improved surface appearance
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy release (demoulding),good flow,improved surface appearance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/1 GF15 MR25 PA6-(GF+MD)40
Manufacturer:
heat stabilised,low warpage,improved surface appearance
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,low warpage,improved surface appearance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ AG511 (PA6+PPE)-GF10
Manufacturer:
Injection Molding
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PAT7001G50BK11 PA*-GF50
Manufacturer:
UV Stabilized,Improved Surface Appearance
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV Stabilized,Improved Surface Appearance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Xyron™ AT610 (PA*+PPE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HAP8720C (PA*+PPE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Xyron™ AT602 (PA*+PPE)-X20
Manufacturer:
No Characteristics
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Xyron™ AG211 (PA*+PPE)-GF10
Manufacturer:
Injection Molding
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Xyron™ AG512 (PA*+PPE)-GF20
Manufacturer:
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® E540i LCP-MX40
Manufacturer:
Low warp, easy flow, smooth surface appearance, inherently flame retardant, FDA compliant
Physical Properties
Density
1.74
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low warp, easy flow, smooth surface appearance, inherently flame retardant, FDA compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® E540i LCP-MX40
Manufacturer:
Celanese
Mineral filled grade with low warp, easy flow and smooth surface appearance
Physical Properties
Density
1.74
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Mineral filled grade with low warp, easy flow and smooth surface appearance
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more