HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11216 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
A 218 MT25 V15 BK
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-MD10_CELANYL® A3 D05 K10 GY 7040/E
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-MD15_CELANYL® A3 D05 K15 GY 7040E
Manufacturer:
Heat stabilized or stable to heat, Low Warpage
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CELANYL® A2 HH KGF2515 BK 9004
Manufacturer:
Low warpage, long term heat ageing resistance, good surface quality
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low warpage, long term heat ageing resistance, good surface quality
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CELANYL® A2 HH KGF2515 BK 9004
Manufacturer:
Low warpage, long term heat ageing resistance, good surface quality
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low warpage, long term heat ageing resistance, good surface quality
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-MD15_CELANYL® A3 D05 K15 BK 9004EUV
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 4030/500 MR30
Manufacturer:
high heat stabilised,high stiffness,low warpage,good flow
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat stabilised,high stiffness,low warpage,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-MD30
Manufacturer:
Flame retardant
Physical Properties
Density
1.6
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 4240/500 GF15 MR25
Manufacturer:
low warpage,heat stabilised,improved surface appearance
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low warpage,heat stabilised,improved surface appearance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NA40 MR15 NL IL
Manufacturer:
Tecomid®
High impact or impact modified
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-MD30_DOMAMID 66M30H1
Manufacturer:
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-MD20
Manufacturer:
impact modified, high heat stabilized
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified, high heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-MD25_DOMAMID 66M25
Manufacturer:
No Characteristics
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-MD20
Manufacturer:
impact modified, high heat stabilized
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified, high heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 910/1 GF15 MR25
Manufacturer:
heat stabilised,improved surface appearance,low warpage
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,improved surface appearance,low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-I-MD15_ALTECH PA66 ECO 4015120 MR15 IM
Manufacturer:
impact modified,heat stabilised,easy release (demoulding),injection moulding grade
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified,heat stabilised,easy release (demoulding),injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DP2325H3.0
Manufacturer:
Injection Molding
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-I-MX40
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AC30 000000 DUS027
Manufacturer:
Injection Molding
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DP2325H3.0
Manufacturer:
Injection Molding
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 11216 materials | Scroll down for more