HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2967 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
POM 7701 SLAP
制造商:
None
improved sliding / wear, heat stabilised
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear, heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-T15 Titacon TR720
制造商:
无
低翘曲
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
低翘曲
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-MX20 RTP 841
制造商:
None
No Characteristics
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF40 RTP 807
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF30_POLIPOM C 100 30GF
制造商:
None
General Chemical Resistance
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM C M90 GF30
制造商:
None
Injection Molding Copolymer
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF30 9I12125 H
制造商:
None
No Characteristics
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM 8005 GF 25
制造商:
None
No Characteristics
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF25_POLIPOM C 100 25GF
制造商:
None
General Chemical Resistance
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF25 LUCEL GC225
制造商:
None
No Characteristics
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF25 CP PRYME® Acetal AC125
制造商:
None
Copolymer
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF20 RTP 803
制造商:
None
Homopolymer
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF20 RTP 803 Z
制造商:
RTP公司
Injection Molding Food contact, Food approval FDA 21 CFR
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Food contact, Food approval FDA 21 CFR
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF20 Titacon GF920
制造商:
None
Injection Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF20 Titacon GF520
制造商:
None
Injection Molding
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF20 RTP 803
制造商:
None
Homopolymer
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POMC GF 20 Natur 08-019-01
制造商:
None
Copolymer
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF20_LNP™ THERMOCOMP™ Compound KF004
制造商:
None
No Characteristics
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF20 NC Q1C001
制造商:
Epsan Plastik San. Tic. A.Ş
General Purpose
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General Purpose
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM-GF15 RamTal PM3013G3NT
制造商:
None
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 2967 materials | Scroll down for more