HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Elastosil® LR 8000/10 A/B
Manufacturer:
VMQ
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3856/30 A/B
Manufacturer:
VMQ
Injection Molding
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 6260 A/B
Manufacturer:
Processing Regional Availability
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing Regional Availability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 6240 A/B
Manufacturer:
Crosslinkable
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Crosslinkable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 5040/30 A/B
Manufacturer:
paste-like, easily pigmentable, very low volatiles content, excellent mechanical properties, no required postcure
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
paste-like, easily pigmentable, very low volatiles content, excellent mechanical properties, no required postcure
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 6255 F_AG
Manufacturer:
Crosslinkable, Low Odor
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Crosslinkable, Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 5040/45 A/B
Manufacturer:
VMQ
paste-like, easily pigmentable, very low volatiles content, excellent mechanical properties, no required postcure
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
paste-like, easily pigmentable, very low volatiles content, excellent mechanical properties, no required postcure
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3076/70 A/B
Manufacturer:
VMQ
Injection Molding Automotive
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3074/60 A/B
Manufacturer:
VMQ
No Characteristics
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3842/50 A/B
Manufacturer:
VMQ
Injection Molding
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3846/30 A/B
Manufacturer:
VMQ
Injection Molding
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3842/40 A/B
Manufacturer:
VMQ
Injection Molding
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3841/50 A/B
Manufacturer:
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3844/20 A/B
Manufacturer:
VMQ
Injection Molding
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3094/60 A/B
Manufacturer:
VMQ
Heat stabilized or stable to heat
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3842/70 A/B
Manufacturer:
VMQ
Injection Molding
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3092/65 A/B
Manufacturer:
VMQ
Heat stabilized or stable to heat
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3846/20 A/B
Manufacturer:
VMQ
Injection Molding, Automotive
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3843/30 A/B
Manufacturer:
VMQ
No Characteristics
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastosil® LR 3844/50 A/B
Manufacturer:
VMQ
Injection Molding
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more