HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2182 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
DF008ER
制造商:
LNP™ THERMOCOMP™
Easy Molding, Mold Release
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Mold Release
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound DX07408 PC-GF40
制造商:
LNP™
UL Yellow Card Link E121562-101357511
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UL Yellow Card Link E121562-101357511
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOTUF™ Compound DF008EI PC-GF40
制造商:
LNP™
High impact or impact modified
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DF0081PI
制造商:
None
High Modulus, Improved Impact, Low Warpage
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Improved Impact, Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
D452 PC-GF40
制造商:
LNP™ THERMOCOMP™
High Modulus, Low Warpage, Good Ductility, High Flow, IMR/IMD Capability
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, High Flow, IMR/IMD Capability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound D451 PC-GF40
制造商:
LNP™
High Modulus, Low Warpage, Good Ductility
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
D451RC PC-GF40
制造商:
LNP™ THERMOCOMP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
D451RC PC-GF40
制造商:
LNP™ THERMOCOMP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LGK4010 PC-GF40
制造商:
LEXAN™
Dimensional Stability, Flame Retardant
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Dimensional Stability, Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
XANTAR™ G6F 23 R
制造商:
None
Flame Retardant ISO 1043 PC-GF30 FR
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame Retardant ISO 1043 PC-GF30 FR
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
XANTAR™ G6F 23 UR PC-GF30 FR
制造商:
三菱工程塑料公司
Flame Retardant, UV Stabilized
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame Retardant, UV Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
M430 GF
制造商:
科思创
biocompatible according to many ISO 10993-1 test requirements suitable for medical devices
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
biocompatible according to many ISO 10993-1 test requirements suitable for medical devices
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound DX10311X PC-GF30
制造商:
LNP
High Modulus and Good Ductility
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus and Good Ductility
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
M830 GF
制造商:
科思创
biocompatible according to many ISO 10993-1 test requirements suitable for medical devices
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
biocompatible according to many ISO 10993-1 test requirements suitable for medical devices
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound DX13354 PC-GF30
制造商:
LNP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Good Surface Aesthetics and Wide Processing Window
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Good Surface Aesthetics and Wide Processing Window
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
8035
制造商:
科思创
High viscosity, easy release precision parts
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High viscosity, easy release precision parts
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound DX13354X PC-GF30
制造商:
LNP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Good Surface Aesthetics, Wide Processing Window and Colorable
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Good Surface Aesthetics, Wide Processing Window and Colorable
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound DX06313 PC-GF30
制造商:
LNP™
Impact Modified, Thin-Wall Molding
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact Modified, Thin-Wall Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DX13354 PC-GF30
制造商:
LNP™ THERMOCOMP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Good Surface Aesthetics and Wide Processing Window
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Good Surface Aesthetics and Wide Processing Window
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound DX13354X PC-GF30
制造商:
LNP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Good Surface Aesthetics, Wide Processing Window and Colorable
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Good Surface Aesthetics, Wide Processing Window and Colorable
Recorded properties are for screening; verify source data and conditions.
Total 2182 materials | Scroll down for more