HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ALFATER XL A40I 4FC0010
Manufacturer:
food contact,compliant EN 71-3,good colorability,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant,easy flow
Physical Properties
Density
0.93
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
food contact,compliant EN 71-3,good colorability,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALFATER XL A40I 2GP0050
Manufacturer:
good recovery,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Physical Properties
Density
0.93
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good recovery,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALFATER XL A40I 3EF0010
Manufacturer:
easy flow,high surface quality,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Physical Properties
Density
0.95
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy flow,high surface quality,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALFATER XL A55I 4PA0010
Manufacturer:
adhesion-modified to polyamide,easy flow,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Physical Properties
Density
0.93
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
adhesion-modified to polyamide,easy flow,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALFATER XL A55I 2GP0050
Manufacturer:
good recovery,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good recovery,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALFATER XL A60I 2GP0050
Manufacturer:
good recovery,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good recovery,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALFATER XL A65I 2GP0050
Manufacturer:
good recovery,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good recovery,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALFATER XL A30I 4GP0000
Manufacturer:
low emission,good colorability,easy flow,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low emission,good colorability,easy flow,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-8290
Manufacturer:
Injection Molding, Other Extrusion Hydrolytically Stable
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-7195
Manufacturer:
Injection Molding, Film Extrusion, Sheet Extrusion, Wire/Cable, Food contact, Food approval FDA 21 CFR, Extrusion, Other Extrusion, Coating, Calandering
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Film Extrusion, Sheet Extrusion, Wire/Cable, Food contact, Food approval FDA 21 CFR, Extrusion, Other Extrusion, Coating, Calandering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-A885
Manufacturer:
Injection Molding, Film Extrusion, Sheet Extrusion, Other
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Film Extrusion, Sheet Extrusion, Other
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALFATER XL A35I 2GP0050
Manufacturer:
good recovery,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good recovery,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-A895
Manufacturer:
Injection Molding, Film Extrusion, Sheet Extrusion, Other
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Film Extrusion, Sheet Extrusion, Other
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-A880
Manufacturer:
Injection Molding, Film Extrusion, Sheet Extrusion, Other
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Film Extrusion, Sheet Extrusion, Other
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-A890
Manufacturer:
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-8280
Manufacturer:
Hydrolytically Stable
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-8254
Manufacturer:
Hydrolytically Stable
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-7185
Manufacturer:
Injection Molding, Film Extrusion, Sheet Extrusion, Wire/Cable, Food contact, Food approval FDA 21 CFR, Extrusion, Other Extrusion, Coating, Calandering
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Film Extrusion, Sheet Extrusion, Wire/Cable, Food contact, Food approval FDA 21 CFR, Extrusion, Other Extrusion, Coating, Calandering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-8285
Manufacturer:
Injection Molding, Other Extrusion Hydrolytically Stable
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-8264
Manufacturer:
Hydrolytically Stable
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more