HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ISOTHANE 3080AF
Manufacturer:
Injection Molding, Other Extrusion, Blow Molding
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Blow Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 3090AF
Manufacturer:
Injection Molding, Other Extrusion, Blow Molding
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Blow Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 3085A
Manufacturer:
Injection Molding, Other Extrusion, Blow Molding General Purpose, Sports Equipment
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Blow Molding General Purpose, Sports Equipment
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2090A
Manufacturer:
Injection Molding, Other Extrusion, Blow Molding, Solvent Resistance, Hydrolytically Stable
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Blow Molding, Solvent Resistance, Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 2080A
Manufacturer:
Injection Molding, Other Extrusion, Blow Molding
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Blow Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 3075A
Manufacturer:
Injection Molding, Other Extrusion, Blow Molding General Purpose, Sports Equipment
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Blow Molding General Purpose, Sports Equipment
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 3065D
Manufacturer:
Injection Molding, Other Extrusion, Blow Molding General Purpose, Sports Equipment
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Blow Molding General Purpose, Sports Equipment
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 2095A
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 1680AE
Manufacturer:
No Characteristics
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 3085AF
Manufacturer:
Injection Molding, Other Extrusion, Blow Molding
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Blow Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 1198A
Manufacturer:
Injection Molding, Other Extrusion, Electrical and Electronical, General Purpose, Sports Equipment
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Electrical and Electronical, General Purpose, Sports Equipment
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 3095A
Manufacturer:
Injection Molding, Other Extrusion, Blow Molding General Purpose, Sports Equipment
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Blow Molding General Purpose, Sports Equipment
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 2085A
Manufacturer:
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 1685AE
Manufacturer:
No Characteristics
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 2075A
Manufacturer:
No Characteristics
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 1190A
Manufacturer:
Injection Molding, Other Extrusion, Electrical and Electronical, General Purpose, Sports Equipment
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Electrical and Electronical, General Purpose, Sports Equipment
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 1180A
Manufacturer:
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 1090A
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1055D
Manufacturer:
Injection Molding, Other Extrusion, Blow Molding
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Blow Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOTHANE 1195A
Manufacturer:
Injection Molding, Other Extrusion, Electrical and Electronical, General Purpose, Sports Equipment
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Electrical and Electronical, General Purpose, Sports Equipment
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more