HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3608 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
STAT-KON™ Compound ZX05043
Manufacturer:
Electrically Conductive, Internally Lubricated, Wear Resistant
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Internally Lubricated, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPA+PTFE RTP 4000 TFE 20
Manufacturer:
Injection Molding
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4009 TFE 5
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.68
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPA+PTFE RTP 4000 TFE 10
Manufacturer:
Injection Molding
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4000 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4007 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4007 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4005 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4099 X 105537
Manufacturer:
Injection Molding
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4007 TFE 10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.63
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4087 TFE 10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Tribocomp® PPA GF30 TS0
Manufacturer:
No Characteristics
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4005 TFE 10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4003 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPA 930/1 GF30 PTFE15
Manufacturer:
ALCOM
improved sliding / wear,high stiffness
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,high stiffness
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4005 TFE 10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4005 TFE 5
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4085 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4085 A TFE 15
Manufacturer:
Injection Molding
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4085 A TFE 15
Manufacturer:
Injection Molding
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 3608 materials | Scroll down for more