HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3608 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
KL004
Manufacturer:
LNP LUBRICOMP
Wear Resistant
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KL004
Manufacturer:
LNP LUBRICOMP
Wear Resistant
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound KL003LH
Manufacturer:
LNP™
Low Extractable, Healthcare, Wear Resistant
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Extractable, Healthcare, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HOSTAFORM® C 9021 TF
Manufacturer:
good chemical resistance, high resistance to thermal and oxidative degradation, very low coefficient of friction
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good chemical resistance, high resistance to thermal and oxidative degradation, very low coefficient of friction
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HOSTAFORM® C 9021 TF
Manufacturer:
good chemical resistance, high resistance to thermal and oxidative degradation, very low coefficient of friction
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good chemical resistance, high resistance to thermal and oxidative degradation, very low coefficient of friction
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupital FL2020 (POM+PTFE)
Manufacturer:
Injection Molding
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EPIMIX POM PTFE 10 NC Q1D001
Manufacturer:
No Characteristics
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ESD 800 TFE 5
Manufacturer:
Injection Molding
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
M 00U 4TF
Manufacturer:
Lubricants
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Lubricants
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM WP POM 5020 TF 18029
Manufacturer:
improved sliding / wear
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM 770/1 PTFE15
Manufacturer:
ALCOM
improved sliding / wear
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
C110 TF20
Manufacturer:
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM POM 770/1 PTFE10
Manufacturer:
heat stabilised,easy release (demoulding),improved sliding / wear
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM 770/1 PTFE18 SI2
Manufacturer:
ALCOM
improved sliding / wear
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM 770/1 PTFE20
Manufacturer:
improved sliding / wear
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM 770/1 PTFE10
Manufacturer:
ALCOM
heat stabilised,easy release (demoulding),improved sliding / wear
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM 770/1 PTFE1,5
Manufacturer:
ALCOM
improved sliding / wear
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
520MP NC010
Manufacturer:
high mechanical strength and rigidity, excellent fatigue and impact resistance, resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals, excellent dimensional stability, good electrical insulating characteristics, naturally resilient, self-lubricating
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high mechanical strength and rigidity, excellent fatigue and impact resistance, resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals, excellent dimensional stability, good electrical insulating characteristics, naturally resilient, self-lubricating
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
520MP NC010
Manufacturer:
high mechanical strength and rigidity, excellent fatigue and impact resistance, resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals, excellent dimensional stability, good electrical insulating characteristics, naturally resilient, self-lubricating
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high mechanical strength and rigidity, excellent fatigue and impact resistance, resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals, excellent dimensional stability, good electrical insulating characteristics, naturally resilient, self-lubricating
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
100AF (POM+PTFE)-Z20
Manufacturer:
High mechanical strength and rigidity, excellent fatigue and impact resistance, resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals, excellent dimensional stability, good electrical insulating characteristics, naturally resilient, self-lubricating
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High mechanical strength and rigidity, excellent fatigue and impact resistance, resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals, excellent dimensional stability, good electrical insulating characteristics, naturally resilient, self-lubricating
Recorded properties are for screening; verify source data and conditions.
Total 3608 materials | Scroll down for more