HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3608 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
POM+PTFE-GF30_POLIMID LUB C 100 3015 GFTF
Manufacturer:
Lubricants
Physical Properties
Density
1.62
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Lubricants
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM+PTFE-GF30_LNP™ LUBRICOMP™ Compound KFL36
Manufacturer:
No Characteristics
Physical Properties
Density
1.72
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM+PTFE-GF10 RTP 801 TFE 10 Z
Manufacturer:
Injection Molding
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM POM 770/1 GF20 PTFE15
Manufacturer:
improved sliding / wear,heat stabilised
Physical Properties
Density
1.63
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
800 GB 10 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM+PTFE-CF20_RTP 883 TFE 15
Manufacturer:
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KEP33
Manufacturer:
Electrically Conductive, Wear Resistant
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM+PTFE-CF10 RTP 881 TFE 10 DEL
Manufacturer:
Injection Molding
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM+PTFE-CF10_RTP 881 TFE 10 DEL
Manufacturer:
No Characteristics
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM+PTFE-CF20_RTP 883 TFE 20
Manufacturer:
No Characteristics
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM+PTFE-CF15_RTP 882 TFE 10
Manufacturer:
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
881 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM+PTFE-AF10
Manufacturer:
Copolymer
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KAL22M
Manufacturer:
Wear Resistant, Dimensional Control
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Dimensional Control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM+PTFE-AF_POLIPOM LUB C 150 1510 KFTF
Manufacturer:
Lubricants
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Lubricants
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM+PTFE-AF15
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM+PTFE-AF
Manufacturer:
Additives, Lubricants
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Additives, Lubricants
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
800 AR 10 TFE 10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM+PTFE-AF15
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
B3 P15 S2 NTLA016 PR341
Manufacturer:
Tenopom
Copolymer
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 3608 materials | Scroll down for more