HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3608 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
LubriOne™ ES-10CF/15T BLACK (PESU+PTFE)-GF10
Manufacturer:
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUVOCOM 1100-8549 (PESU+PTFE)-CF
Manufacturer:
No Characteristics
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1481 TFE 10 (PESU+PTFE)-CF10
Manufacturer:
No Characteristics
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1481 N TFE 15 (PESU+PTFE)-CF10
Manufacturer:
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound JCL36 (PESU+PTFE)-CF30
Manufacturer:
Internally Lubricated, Wear Resistant, Electrically Conductive
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Internally Lubricated, Wear Resistant, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1405 TFE 15 (PESU+PTFE)-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.68
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
G-PAEK™ 1220FE (PEK+PTFE)
Manufacturer:
Injection Molding Tribologic Grade
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
G-PAEK™ 1230FC (PEK+PTFE)-(CF+Z)
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
G-PAEK™ 1215FC (PEK+PTFE)-(CD+Z)
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HILUB 7A 252 (PEK+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEK+PTFE-CF+Z_G-PAEK™ 1230FC
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
G-PAEK™ 1215TFP (PEK+PTFE)
Manufacturer:
Flame retardant, Heat stabilized or stable to heat Acid Resistance, Alkali Resistance, General Chemical Resistance
Physical Properties
Density
1.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat Acid Resistance, Alkali Resistance, General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEK+PTFE-GF_G-PAEK™ 1201FG
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
640/352 (PEK+PTFE)-GF
Manufacturer:
No Characteristics
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2100 LF TFE 10 (PEI+PTFE)
Manufacturer:
Injection Molding
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 4002 - Americas
Manufacturer:
PTFE filled, standard flow
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
PTFE filled, standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 4002 - Americas
Manufacturer:
PTFE filled, standard flow
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
PTFE filled, standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 4001 - Americas
Manufacturer:
Standard flow
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 2100 TFE 40 (PEI+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 2100 TFE 15 Z (PEI+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 3608 materials | Scroll down for more