HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2203 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PC356
Manufacturer:
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 HV TZ NTLA010 PC357
Manufacturer:
Makropol®
High impact or impact modified
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
B3 MF TZ UV VRD0353 PC328
Manufacturer:
Makropol®
U.V. stabilized or stable to weather
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC
Manufacturer:
UV stabilized, medium flow opaque injection molding (IM) grade
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, medium flow opaque injection molding (IM) grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 HL UV BRCA596 PC318
Manufacturer:
Injection Molding, Other Extrusion
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
B3 HF FR UV CRLA010 PC312
Manufacturer:
Makropol®
Flame retardant, U.V. stabilized or stable to weather, Transparent
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC
Manufacturer:
LNP™ ELCRES™ EXL9334
UV stabilized, medium flow opaque material, extreme low temperature ductility (-40°C), excellent processability
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, medium flow opaque material, extreme low temperature ductility (-40°C), excellent processability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Rx2530 RE
Manufacturer:
Transparent, Sterilizable, Gamma irradiation sterilization
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent, Sterilizable, Gamma irradiation sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Rx3440
Manufacturer:
Makrolon®
high viscosity, high lipid resistance, suitable for sterilization with high-energy radiation, biocompatible according to many ISO 10993-1 test requirements, improved oncology drug resistance transparent parts for medical devices
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high viscosity, high lipid resistance, suitable for sterilization with high-energy radiation, biocompatible according to many ISO 10993-1 test requirements, improved oncology drug resistance transparent parts for medical devices
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
M402 LF
Manufacturer:
Biocompatible, Tribologic Grade, Opaque, Medical Grade
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Biocompatible, Tribologic Grade, Opaque, Medical Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LED5902 FR RE
Manufacturer:
Flame retardant, U.V. stabilized or stable to weather, Transparent
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® OD2015
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® M404 LF
Manufacturer:
low viscosity, improved friction characteristics, biocompatible according to many ISO 10993-1 test requirements
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low viscosity, improved friction characteristics, biocompatible according to many ISO 10993-1 test requirements
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® RW6267 X
Manufacturer:
Flame retardant, U.V. stabilized or stable to weather
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Rx1805
Manufacturer:
high lipid resistance, suitable for sterilization with high-energy radiation, biocompatible according to many ISO 10993-1 test requirements, high viscosity, transparent parts for medical devices
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high lipid resistance, suitable for sterilization with high-energy radiation, biocompatible according to many ISO 10993-1 test requirements, high viscosity, transparent parts for medical devices
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® LED5202
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® LED2245
Manufacturer:
Low viscosity easy release
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low viscosity easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® LED2245 HP
Manufacturer:
low viscosity, easy release
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low viscosity, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® LED2245 DQ
Manufacturer:
easy release Easy flow low viscosity translucent material with low diffusion for light guides and thick-wall optical parts
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy release Easy flow low viscosity translucent material with low diffusion for light guides and thick-wall optical parts
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® ET3117 RE
Manufacturer:
UV stabilized, weather stable, contains renewable resources, ISCC Plus
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, weather stable, contains renewable resources, ISCC Plus
Recorded properties are for screening; verify source data and conditions.
Total 2203 materials | Scroll down for more