HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2203 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Makrolon® ET3227 RE
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ET UV112
Manufacturer:
Makrolon®
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® DP1-1821
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AX2477 ST
Manufacturer:
Makrolon®
UV stabilized, easy release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® AX2675
Manufacturer:
Medium Viscosity Easy Release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium Viscosity Easy Release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® AL2447 RE
Manufacturer:
Automotive lighting, low viscosity, UV stabilized, easy release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Automotive lighting, low viscosity, UV stabilized, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® AL2647 RE CQ
Manufacturer:
UV stabilized, weather stable, renewable resources
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, weather stable, renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 6165 X RE
Manufacturer:
low viscosity, easy release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low viscosity, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 2805 MAS145
Manufacturer:
general purpose medium viscosity easy release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
general purpose medium viscosity easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 2858
Manufacturer:
Medium viscosity, easy release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium viscosity, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 2467
Manufacturer:
low viscosity, UV stabilized, easy release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low viscosity, UV stabilized, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 2558
Manufacturer:
medical devices, suitable for ETO and steam sterilization at 121 °C, biocompatible according to many ISO 10993-1 test requirements, medium viscosity, easy release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medical devices, suitable for ETO and steam sterilization at 121 °C, biocompatible according to many ISO 10993-1 test requirements, medium viscosity, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 2405 MAS048
Manufacturer:
low viscosity easy release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low viscosity easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LX-7000
Manufacturer:
Injection Molding Light Diffusing Additives
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Light Diffusing Additives
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 1837 MAS081
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC 3030-10
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat, Transparent Chemical Resistance General Chemical Resistance
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat, Transparent Chemical Resistance General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC 3010-30
Manufacturer:
High impact or impact modified, Heat stabilized or stable to Electrical and Electronical heat, Transparent
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to Electrical and Electronical heat, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC 1621-02
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat, Transparent
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC 1302HP-21
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat, Transparent
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOY PC 1300-15
Manufacturer:
High impact or impact modified, Heat stabilized or stable
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable
Recorded properties are for screening; verify source data and conditions.
Total 2203 materials | Scroll down for more