HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5414 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PPcompound G3230AE
Manufacturer:
Low Emission, Homopolymer
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Emission, Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound G3135X
Manufacturer:
high stiffness, high impact, high heat resistance, chemical resistance
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high stiffness, high impact, high heat resistance, chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 95610CSU10
Manufacturer:
high impact and stiffness
Physical Properties
Density
0.961
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact and stiffness
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound G3230A
Manufacturer:
Homopolymer
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 9154
Manufacturer:
elastomer-modified mineral filled
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
elastomer-modified mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 9180B
Manufacturer:
elastomer-modified mineral filled
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
elastomer-modified mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 9156
Manufacturer:
high scratch resistance, high stiffness, good impact and high flow
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high scratch resistance, high stiffness, good impact and high flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 9152
Manufacturer:
high scratch resistance, high stiffness, good impact and high flow
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high scratch resistance, high stiffness, good impact and high flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 8950
Manufacturer:
modified mineral filled
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
modified mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 8900
Manufacturer:
mineral filled
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 8750MB1
Manufacturer:
elastomer-modified mineral filled
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
elastomer-modified mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7890
Manufacturer:
high flow, good scratch resistance, low density, good stiffness, broad processing window, good esthetical performance
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, good scratch resistance, low density, good stiffness, broad processing window, good esthetical performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7995
Manufacturer:
mineral filled, high flow, good scratch resistance, good stiffness, broad processing window, good esthetical performance
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
mineral filled, high flow, good scratch resistance, good stiffness, broad processing window, good esthetical performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 8502
Manufacturer:
modified mineral filled
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
modified mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7715
Manufacturer:
high scratch resistance, high stiffness, medium impact, good flow, broad processing window, good esthetical performance
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high scratch resistance, high stiffness, medium impact, good flow, broad processing window, good esthetical performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7890A
Manufacturer:
high flow, good scratch resistance, anti static properties, low density, good stiffness, broad processing window, good esthetical performance
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, good scratch resistance, anti static properties, low density, good stiffness, broad processing window, good esthetical performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7890
Manufacturer:
high flow, good scratch resistance, low density, good stiffness, broad processing window, good esthetical performance
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, good scratch resistance, low density, good stiffness, broad processing window, good esthetical performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7716
Manufacturer:
high scratch resistance, high stiffness, medium impact, good flow, broad processing window, good esthetical performance, excellent UV exterior stabilization
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high scratch resistance, high stiffness, medium impact, good flow, broad processing window, good esthetical performance, excellent UV exterior stabilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 8250U
Manufacturer:
mineral filled
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 8501
Manufacturer:
No Characteristics
Physical Properties
Density
0.98
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 5414 materials | Scroll down for more