HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1445 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Ultem™ PEI
Manufacturer:
No Characteristics
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ STAT-KON™ Compound EE003XXC PEI-CF15
Manufacturer:
LNP Clean Compounding Technology, Electrically Conductive
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
LNP Clean Compounding Technology, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound EE003XXC PEI-CF15
Manufacturer:
LNP
Electrically Conductive
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
9200CF PEI-CF10
Manufacturer:
Injection Molding Increased electrical conductivity
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Increased electrical conductivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2181 PEI-CF10
Manufacturer:
RTP
No Characteristics
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ESD 2181 PEI-CF10
Manufacturer:
No Characteristics
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2100 LF TFE 10 (PEI+PTFE)
Manufacturer:
Injection Molding
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 4002 - Americas
Manufacturer:
PTFE filled, standard flow
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
PTFE filled, standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EEF42
Manufacturer:
Electrically Conductive
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 4001 - Americas
Manufacturer:
Standard flow
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2181 HEC HF PEI-(CF+MED(Ni))10
Manufacturer:
Increased electrical conductivity
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 2100 TFE 40 (PEI+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 2100 TFE 15 Z (PEI+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2100 TFE 15 (PEI+PTFE)
Manufacturer:
Injection Molding
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ LUBRICOMP™ Compound EFL36E (PEI+PTFE)-GF30
Manufacturer:
Easy Molding, Wear Resistant
Physical Properties
Density
1.6
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2105 TFE 10 (PEI+PTFE)-GF30
Manufacturer:
Injection Molding
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 4211 - Asia (PEI+PTFE)-GF20
Manufacturer:
standard flow
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 2183 TFE 10 (PEI+PTFE)-CF20
Manufacturer:
Injection Molding
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2103 TFE 10 (PEI+PTFE)-GF20
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2105 HF TFE 15 (PEI+PTFE)-GF20
Manufacturer:
No Characteristics
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 1445 materials | Scroll down for more