HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1225 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Omnix® DW-4050 (PA*+PPA)-GF50
Manufacturer:
No Characteristics
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Omnix® FC-4050 NT 000 (PA*+PPA)-GF50
Manufacturer:
No Characteristics
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Omnix® 4030 BK 000 (PA*+PPA)-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Omnix® 4050 NT 000 (PA*+PPA)-GF50
Manufacturer:
No Characteristics
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Zytel® HTNFE18502 NC010
Manufacturer:
Unreinforced, Heat Stabilized, Toughened, PPA
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Unreinforced, Heat Stabilized, Toughened, PPA
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Zytel® HTNFE18502 NC010
Manufacturer:
Unreinforced, Heat Stabilized, Toughened, PPA
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Unreinforced, Heat Stabilized, Toughened, PPA
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
UEF26AS
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive, Heat Stabilized
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HPPA LGF-4060
Manufacturer:
Xencor™
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HPPA LGF-4060
Manufacturer:
Xencor™
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HPPA LGF-4050 BK 000-9
Manufacturer:
Xencor™
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-GF50_Xencor™ HPPA LGF-4050 BK 000-9
Manufacturer:
Injection Molding, Compression Molding, Creep Resistance, Fatigue Resistance, Long fiber reinforced, Low Warpage
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Compression Molding, Creep Resistance, Fatigue Resistance, Long fiber reinforced, Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HPPA LGF-4050
Manufacturer:
Xencor™
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Zytel® HTN42G30EF BK083LM
Manufacturer:
Biobased, well suited for laser marking, PPA resin
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Biobased, well suited for laser marking, PPA resin
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound UX05051
Manufacturer:
LNP
Heat Stabilized, Flame Retardant, Hot Water Moldable, Wear Resistant
Physical Properties
Density
1.76
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized, Flame Retardant, Hot Water Moldable, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound UL002S
Manufacturer:
LNP™
Heat Stabilized, Wear Resistant
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRILOY™ Compound UA200A
Manufacturer:
LNP™
Wear Resistant
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
UA200A
Manufacturer:
LNP™ LUBRILOY™
Wear Resistant
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound UX06002
Manufacturer:
LNP
Easy Molding, Internally Lubricated, Heat Stabilized, Wear Resistant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Internally Lubricated, Heat Stabilized, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound UFL36AS
Manufacturer:
LNP™
Heat Stabilized, Internally Lubricated, Wear Resistant
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized, Internally Lubricated, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound UFL36SXC
Manufacturer:
LNP™
Internally Lubricated, Wear Resistant, Heat Stabilized
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Internally Lubricated, Wear Resistant, Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Total 1225 materials | Scroll down for more