HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (37154 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PA66-GF15_POLIMID A 15 GF EM1
制造商:
None
High impact or impact modified
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_PG15-01NC
制造商:
None
Injection Molding, Encapsulation
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Encapsulation
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_PG15-02BK
制造商:
None
No Characteristics
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-G15_PA66-GF15
制造商:
None
Low Warpage
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15 PENTAMID A GV15 H
制造商:
None
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15 PENTAMID A GV15 E H
制造商:
None
No Characteristics
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_NA40 GR15 NL
制造商:
None
Thermal Stability, Chemical Resistance
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermal Stability, Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_Ferro Nylon RNY15MS01GY
制造商:
朗盛工业
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15 EPLAMID 66 GFS 15 HS NC Q1B501
制造商:
None
Heat stabilized
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15 ECOMID® ARX H GF15 BK 9011H
制造商:
塞拉尼斯
General purpose grade, for any technical use.
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose grade, for any technical use.
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_FORMPOLY® SN66GF15LT BLACK
制造商:
None
lubricated, reduced shrinkage
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
lubricated, reduced shrinkage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_DOMAMID 66G15
制造商:
DOMO工程塑料
Injection Molding
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_DOMAMID 66G15FC
制造商:
DOMO 工程塑料
Injection Molding
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_DOMAMID FR 66G15V0E
制造商:
None
Flame retardant, Halogen-free, Phosphorus-free
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Phosphorus-free
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_CELANYL® A3 H GF15 TP05S BK 9005Z
制造商:
塞拉尼斯
Lubricated grade with improved wear resistance, PTFE free
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Lubricated grade with improved wear resistance, PTFE free
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA 6.6 GF 15
制造商:
CompaMid
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15 Celanese
制造商:
塞拉尼斯
General purpose grade
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_CELANYL® A3 GF15 NC 1102XFA
制造商:
塞拉尼斯
Injection Molding
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_AKROMID® A3 GF 15 1 natural
制造商:
None
Light stabilized or stable to light, Heat stabilized or stable to heat
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Light stabilized or stable to light, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15 A3 GF 15 1 natural
制造商:
None
Light stabilized or stable to light, Heat stabilized or stable to heat
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Light stabilized or stable to light, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Total 37154 materials | Scroll down for more