HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25727 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66+PA6I/6T)-GF30 Akro-Plastic GmbH
Manufacturer:
Akro-Plastic GmbH
Injection Molding
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6I6T-GF30
Manufacturer:
AKROLOY®
Glass Fiber Reinforced
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Glass Fiber Reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6I6T-GF30 D51
Manufacturer:
No Characteristics
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6I/6T)-GF30 Akro-Plastic GmbH
Manufacturer:
Akro-Plastic GmbH
Injection Molding
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6I/6T)-GF30
Manufacturer:
For all kind of injection moulding parts with high requirements to stiffness
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
For all kind of injection moulding parts with high requirements to stiffness
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6I/6T-GF40 Akro-Plastic GmbH
Manufacturer:
Glass Filled
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Glass Filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6I6T-CF40_AKROLOY® PA ICF 40 black 5270
Manufacturer:
Injection Molding Tribologic Grade
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6I/6T)-GF40 Akro-Plastic GmbH
Manufacturer:
No Characteristics
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6I6T-CF30 black 5269
Manufacturer:
No Characteristics
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6-MX+GF40_AKROMID® C3 GFM 1525 1 black 6653
Manufacturer:
Injection Molding Low Warpage
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6-GF50 1 black 4401
Manufacturer:
Heat stabilized
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6-GF40 1 black
Manufacturer:
No Characteristics
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6-GF35_Starflam® RF0077P
Manufacturer:
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6-GF35_AKROMID® C3 GF 35 5 XTC black 6680
Manufacturer:
Heat stabilized
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6-GF30
Manufacturer:
TEREZ® AB 300 H GL30
High impact or impact modified
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6-GF35 AKROMID® C3 GF 35 1 natural
Manufacturer:
Heat stabilized
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6-GF30 H K2512
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6-GF30_AKROMID® C3 GF 30 1 FR black 7243
Manufacturer:
Regional Availability
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Regional Availability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6-GF30_AKROMID® C3 GF 30 1 black 4363
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PA6-GF30_AKROMID® C3 GF 30 5 XTC natural (4499)
Manufacturer:
natural
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
natural
Recorded properties are for screening; verify source data and conditions.
Total 25727 materials | Scroll down for more