HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1275 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound LCL36
Manufacturer:
LNP™
Electrically Conductive, Internally Lubricated, Wear Resistant
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Internally Lubricated, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
770FC30
Manufacturer:
ZYPEEK
Tribologic Grade
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound LCL36E
Manufacturer:
LNP™
Easy Molding, Wear Resistant, Electrically Conductive
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Wear Resistant, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2283 HF TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2285 HF TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Witcom PEEK/3C/3L1-EM
Manufacturer:
Increased electrical conductivity
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2282 LF TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAKEEP® 4000 FC30
Manufacturer:
Evonik
Carbon fiber-reinforced, selflubricating, high mechanical, thermal, and chemical resistance
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Carbon fiber-reinforced, selflubricating, high mechanical, thermal, and chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HT® PEEK 2111 CF10/GR10/TF10
Manufacturer:
Tribologic Grade
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAKEEP® 2000 FC30
Manufacturer:
Medium-viscosity, carbon fiber-reinforced, graphite and PTFE-filled
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium-viscosity, carbon fiber-reinforced, graphite and PTFE-filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2200 AR 15 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2200 LF AR 15 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GADEL 2200 PAEK
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LCF40
Manufacturer:
Complet®
Long fiber reinforced
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Long fiber reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FIL-A-GEHR
Manufacturer:
PEEK®
Good Adhesion, Low Odor
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Low Odor
Recorded properties are for screening; verify source data and conditions.
Total 1275 materials | Scroll down for more