HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11216 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA666-GLF50-0111P7.5/11
Manufacturer:
Injection Molding, Creep Resistance, Long fiber reinforced, Low Warpage, Copolymer
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Creep Resistance, Long fiber reinforced, Low Warpage, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-MD30
Manufacturer:
EMS-GRIVORY
Heat stabilized or stable to heat
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GLF50-0111P10/11
Manufacturer:
Long fiber reinforced, Low Warpage, Copolymer
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Long fiber reinforced, Low Warpage, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GLF50-0112P7,5/10
Manufacturer:
Injection Molding, Creep Resistance, Long fiber reinforced, Low Warpage, Copolymer
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Creep Resistance, Long fiber reinforced, Low Warpage, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-MD30
Manufacturer:
EMS-GRIVORY
Heat stabilized or stable to heat
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-MD30
Manufacturer:
EMS-GRIVORY
Heat stabilized or stable to heat
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-MD10_BERGAMID® AB70MI10U
Manufacturer:
flame retardant based on halogene
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flame retardant based on halogene
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GLF50
Manufacturer:
Celanese
Long fiber reinforced
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Long fiber reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GLF60-0101P10
Manufacturer:
No Characteristics
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-MD40
Manufacturer:
EMS-GRIVORY
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GLF40
Manufacturer:
Long fiber reinforced
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Long fiber reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GLF40
Manufacturer:
Long fiber reinforced
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Long fiber reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GF60
Manufacturer:
EMS-GRIVORY
Heat stabilized or stable to heat
Physical Properties
Density
1.68
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GF43 Wellamid® GF43-666 XE-BK167A
Manufacturer:
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GF43
Manufacturer:
No Characteristics
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GF50
Manufacturer:
EMS-GRIVORY
Improved impact resistance, Improved heat resistance
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved impact resistance, Improved heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GF50
Manufacturer:
Injection Molding
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GF50
Manufacturer:
EMS-GRIVORY
Improved flowability and demoulding
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved flowability and demoulding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GF50
Manufacturer:
EMS-GRIVORY
Improved flowability and demoulding, Improved heat resistance
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved flowability and demoulding, Improved heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA666-GF60
Manufacturer:
EMS-GRIVORY
Heat stabilized or stable to heat
Physical Properties
Density
1.68
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Total 11216 materials | Scroll down for more