HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2573 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Elastollan® C 74 D (TPU-ARES)
Manufacturer:
high tensile strength, excellent tear strength, very good damping behavior, good rebound elasticity, very good wear performance, good flexibility at low temperature, resistance to hydrolysis
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high tensile strength, excellent tear strength, very good damping behavior, good rebound elasticity, very good wear performance, good flexibility at low temperature, resistance to hydrolysis
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® B 98 A (TPU-ARES)
Manufacturer:
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® C 85 A (TPU-ARES)
Manufacturer:
high tensile strength, excellent tear strength, very good damping behavior, good rebound elasticity, very good wear performance, good flexibility at low temperature, resistance to hydrolysis
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high tensile strength, excellent tear strength, very good damping behavior, good rebound elasticity, very good wear performance, good flexibility at low temperature, resistance to hydrolysis
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 598 A (TPU-ARES)
Manufacturer:
good abrasion resistance
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good abrasion resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan B 90 A (TPU-ARES)
Manufacturer:
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® 598 A (TPU-ARES)
Manufacturer:
good abrasion resistance
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good abrasion resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 585 A (TPU-ARES)
Manufacturer:
No Characteristics
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 590 A (TPU-ARES)
Manufacturer:
No Characteristics
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan R 3001
Manufacturer:
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 3868D (TPU-ARES+ABS)
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 3868D (TPU-ARES+ABS)
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan R 3000 (TPU-ARES)-GF
Manufacturer:
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan LP 9277
Manufacturer:
excellent colour fastness, easy flowing, detailed reproduction of surface structures, resistance to hydrolysis
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent colour fastness, easy flowing, detailed reproduction of surface structures, resistance to hydrolysis
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan L 785 A
Manufacturer:
high transparent
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
R 3001
Manufacturer:
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 2795A SMP (TPU-ARES)
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3864D (TPU-ARES+ABS)
Manufacturer:
Desmopan
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 3864D (TPU-ARES+ABS)
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 560 D (TPU-ARES)
Manufacturer:
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® A C 85 A
Manufacturer:
excellent colour fastness, easy flowing, detailed reproduction of surface structures, resistance to hydrolysis and low fogging values
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent colour fastness, easy flowing, detailed reproduction of surface structures, resistance to hydrolysis and low fogging values
Recorded properties are for screening; verify source data and conditions.
Total 2573 materials | Scroll down for more