HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
WCP921A
Manufacturer:
flexible, non-reinforced injection moldable blend
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced injection moldable blend
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCP921A
Manufacturer:
FLEX NORYL™
flexible, non-reinforced injection moldable blend
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced injection moldable blend
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCV072
Manufacturer:
FLEX NORYL™
flexible, non-reinforced extrusion grade
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrusion grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCP921
Manufacturer:
high flow, flexible, non-reinforced injection moldable blend
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, flexible, non-reinforced injection moldable blend
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCV072
Manufacturer:
FLEX NORYL™
flexible, non-reinforced extrusion grade, ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, good dielectric strength
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrusion grade, ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, good dielectric strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCP841
Manufacturer:
FLEX NORYL™
Flexible, Non-reinforced, Injection moldable
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flexible, Non-reinforced, Injection moldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCP921A
Manufacturer:
FLEX NORYL™
flexible, non-reinforced, injection moldable, low specific gravity, very low water absorption, dimensional stability
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced, injection moldable, low specific gravity, very low water absorption, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCP761
Manufacturer:
high flow, flexible, non-reinforced, over-molding applications
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, flexible, non-reinforced, over-molding applications
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCP921
Manufacturer:
FLEX NORYL™
high flow, flexible, non-reinforced injection moldable
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, flexible, non-reinforced injection moldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCP921A
Manufacturer:
flexible, non-reinforced injection moldable blend
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced injection moldable blend
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCP921
Manufacturer:
FLEX NORYL™
high flow, flexible, non-reinforced injection moldable
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, flexible, non-reinforced injection moldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCV072
Manufacturer:
flexible, non-reinforced extrusion grade, ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, good dielectric strength
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrusion grade, ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, good dielectric strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCP921
Manufacturer:
FLEX NORYL™
high flow, flexible, non-reinforced injection moldable
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, flexible, non-reinforced injection moldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCP841
Manufacturer:
FLEX NORYL™
Flexible, Non-reinforced, Injection moldable
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flexible, Non-reinforced, Injection moldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCV063
Manufacturer:
FLEX NORYL™
flexible, non-reinforced extrusion grade
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrusion grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCP921A
Manufacturer:
flexible, non-reinforced injection moldable blend
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced injection moldable blend
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCP921A
Manufacturer:
FLEX NORYL™
flexible, non-reinforced, injection moldable, low specific gravity, very low water absorption, dimensional stability
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced, injection moldable, low specific gravity, very low water absorption, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCV063
Manufacturer:
FLEX NORYL™
flexible, non-reinforced extrusion grade
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrusion grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCD895
Manufacturer:
flexible, non-reinforced extrudable blend, non-halogenated flame retardant, superior thermal stability, very low water absorption, robust tensile strength, tensile elongation, low specific gravity
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, non-halogenated flame retardant, superior thermal stability, very low water absorption, robust tensile strength, tensile elongation, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCD944
Manufacturer:
FLEX NORYL™
Flexible, non-reinforced extrudable blend
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flexible, non-reinforced extrudable blend
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more