HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
NH7010
Manufacturer:
NORYL™
non-brominated, non-chlorinated flame retardance, high heat resistance, good flow, low specific gravity
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-brominated, non-chlorinated flame retardance, high heat resistance, good flow, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH6020
Manufacturer:
NORYL™
High heat resistance, thin-wall FR performance
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, thin-wall FR performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH6020
Manufacturer:
NORYL™
{'mold_shrinkage_parallel': None, 'molding_shrinkage_normal': None, 'tensile_modulus': '2740 MPa', 'tensile_strength': '67 MPa', 'strain_at_break': '6.1 %', 'flexural_modulus': '3020 MPa', 'flexural_strength': '49 J/m', 'charpy_impact_23c': '9 kJ/m²', 'charpy_notched_impact_23c': '8 kJ/m²', 'izod_notched_impact_23c': '5 kJ/m²', 'izod_notched_impact_minus_30c': '36 J/m', 'melting_point': None, 'tg': None, 'hdt_180': None, 'hdt_045': None, 'vicat_softening': '150 °C'}
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'mold_shrinkage_parallel': None, 'molding_shrinkage_normal': None, 'tensile_modulus': '2740 MPa', 'tensile_strength': '67 MPa', 'strain_at_break': '6.1 %', 'flexural_modulus': '3020 MPa', 'flexural_strength': '49 J/m', 'charpy_impact_23c': '9 kJ/m²', 'charpy_notched_impact_23c': '8 kJ/m²', 'izod_notched_impact_23c': '5 kJ/m²', 'izod_notched_impact_minus_30c': '36 J/m', 'melting_point': None, 'tg': None, 'hdt_180': None, 'hdt_045': None, 'vicat_softening': '150 °C'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH7010
Manufacturer:
NORYL™
non-brominated, non-chlorinated flame retardance, high heat resistance, good flow, low specific gravity
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-brominated, non-chlorinated flame retardance, high heat resistance, good flow, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH6010B
Manufacturer:
Low smoke production upon burning, high heat resistance, very low specific gravity, and compliance to IEC
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low smoke production upon burning, high heat resistance, very low specific gravity, and compliance to IEC
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH6010B
Manufacturer:
non-reinforced blend, heat stabilized, impact modified, low smoke production upon burning, high heat resistance, very low specific gravity, compliance to IEC
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend, heat stabilized, impact modified, low smoke production upon burning, high heat resistance, very low specific gravity, compliance to IEC
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH6010B
Manufacturer:
Low smoke production upon burning, high heat resistance, very low specific gravity, and compliance to IEC
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low smoke production upon burning, high heat resistance, very low specific gravity, and compliance to IEC
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH5120
Manufacturer:
Non-brominated, non-chlorinated flame retardant, good balance of heat, flow, hydrolytic stability, low creep and dimensional stability, mechanical property retention in tough outdoor environments
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-brominated, non-chlorinated flame retardant, good balance of heat, flow, hydrolytic stability, low creep and dimensional stability, mechanical property retention in tough outdoor environments
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH5120RC3
Manufacturer:
NORYL™
unfilled Post Consumer recycle (PCR) based injection moldable modified polyphenylene ether resin
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unfilled Post Consumer recycle (PCR) based injection moldable modified polyphenylene ether resin
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH5020
Manufacturer:
High heat resistance, good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH5020
Manufacturer:
NORYL™
High heat resistance, thin-wall FR performance, excellent creep resistance, dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, thin-wall FR performance, excellent creep resistance, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH5020
Manufacturer:
NORYL™
non-brominated, non-chlorinated flame retardant, high heat resistance, thin-wall FR performance, good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-brominated, non-chlorinated flame retardant, high heat resistance, thin-wall FR performance, good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH5020
Manufacturer:
NORYL™
High heat resistance, thin-wall FR performance, good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, thin-wall FR performance, good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH5120
Manufacturer:
Non-brominated, non-chlorinated flame retardant, good balance of heat, flow, hydrolytic stability, low creep and dimensional stability, mechanical property retention in tough outdoor environments
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-brominated, non-chlorinated flame retardant, good balance of heat, flow, hydrolytic stability, low creep and dimensional stability, mechanical property retention in tough outdoor environments
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH5020
Manufacturer:
NORYL™
high heat resistance, thin-wall FR performance, good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat resistance, thin-wall FR performance, good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin NH4050
Manufacturer:
No Characteristics
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH5110E
Manufacturer:
NORYL™
Flame retardant
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH4030B
Manufacturer:
high flow, injection moldable and extrusion grade
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, injection moldable and extrusion grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH4030B
Manufacturer:
NORYL™
high flow, injection moldable and extrusion grade, non-brominated, non-chlorinated flame retardant, low specific gravity
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, injection moldable and extrusion grade, non-brominated, non-chlorinated flame retardant, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH5110E
Manufacturer:
NORYL™
Flame retardant
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more