HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
LTA6020
Manufacturer:
NORYL™
Non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LTA6020
Manufacturer:
NORYL™
Good dimensional stability, high heat performance, low moisture uptake, long-term aging/retention of mechanical properties
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good dimensional stability, high heat performance, low moisture uptake, long-term aging/retention of mechanical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1050
Manufacturer:
NORYL™
non-reinforced, improved dimensional stability, flow, non-brominated, non-chlorinated flame retardant, excellent dimensional stability, good electrical properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced, improved dimensional stability, flow, non-brominated, non-chlorinated flame retardant, excellent dimensional stability, good electrical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1150
Manufacturer:
NORYL™
heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LTA6020
Manufacturer:
NORYL™
Non-brominated, non-chlorinated flame retardant, Good dimensional stability, High heat performance, Low moisture uptake, Long-term aging/retention of mechanical properties
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-brominated, non-chlorinated flame retardant, Good dimensional stability, High heat performance, Low moisture uptake, Long-term aging/retention of mechanical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS6010
Manufacturer:
NORYL™
High performance, injection moldable and extrudable, non-brominated, non-chlorinated flame retardant, low smoke production upon burning, high heat resistance, very low specific gravity, enhanced resistance to melting and dripping, heat stabilized and impact modified
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High performance, injection moldable and extrudable, non-brominated, non-chlorinated flame retardant, low smoke production upon burning, high heat resistance, very low specific gravity, enhanced resistance to melting and dripping, heat stabilized and impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1050
Manufacturer:
NORYL™
Improved dimensional stability and flow, non-brominated, non-chlorinated flame retardant, very low moisture absorption, excellent dimensional stability, good electrical properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved dimensional stability and flow, non-brominated, non-chlorinated flame retardant, very low moisture absorption, excellent dimensional stability, good electrical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1050
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1150
Manufacturer:
NORYL™
heat resistance, good impact resistance, low specific gravity, dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat resistance, good impact resistance, low specific gravity, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LTA6020
Manufacturer:
NORYL™
Non-brominated, non-chlorinated flame retardant, good dimensional stability, high heat performance, low moisture uptake, long-term aging/retention of mechanical properties
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-brominated, non-chlorinated flame retardant, good dimensional stability, high heat performance, low moisture uptake, long-term aging/retention of mechanical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS6010
Manufacturer:
Non-reinforced blend, non-brominated, non-chlorinated flame retardant, heat stabilized, impact modified, low smoke production upon burning, high heat resistance, very low specific gravity, enhanced resistance to melting and dripping
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, non-brominated, non-chlorinated flame retardant, heat stabilized, impact modified, low smoke production upon burning, high heat resistance, very low specific gravity, enhanced resistance to melting and dripping
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N110
Manufacturer:
NORYL™
impact modified, injection moldable
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified, injection moldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1050
Manufacturer:
NORYL™
improved dimensional stability and flow, non-brominated, non-chlorinated flame retardant, very low moisture absorption, excellent dimensional stability, good electrical properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved dimensional stability and flow, non-brominated, non-chlorinated flame retardant, very low moisture absorption, excellent dimensional stability, good electrical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1050
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LTA6020
Manufacturer:
NORYL™
Non-brominated, non-chlorinated flame retardant, good dimensional stability, high heat performance, low moisture uptake, long-term aging/retention of mechanical properties
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-brominated, non-chlorinated flame retardant, good dimensional stability, high heat performance, low moisture uptake, long-term aging/retention of mechanical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS6010
Manufacturer:
NORYL™
Flame retardant, High impact or impact modified
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1050
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS6010
Manufacturer:
NORYL™
Non-brominated, non-chlorinated flame retardant, high heat resistance, very low specific gravity, enhanced resistance to melting and dripping, heat stabilized, impact modified
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-brominated, non-chlorinated flame retardant, high heat resistance, very low specific gravity, enhanced resistance to melting and dripping, heat stabilized, impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N110
Manufacturer:
NORYL™
impact modified, injection moldable
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified, injection moldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS6010
Manufacturer:
NORYL™
Low smoke production, high heat resistance, very low specific gravity, enhanced resistance to melting and dripping, heat stabilized, impact modified
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low smoke production, high heat resistance, very low specific gravity, enhanced resistance to melting and dripping, heat stabilized, impact modified
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more