HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
LPN170HG
Manufacturer:
High Heat Resistance, Low Density, High Gloss, Low Outgassing, Good Dimensional Stability
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Heat Resistance, Low Density, High Gloss, Low Outgassing, Good Dimensional Stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LPN170HG
Manufacturer:
High heat resistance, low density, high gloss, low outgassing, good dimensional stability
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, low density, high gloss, low outgassing, good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS6010
Manufacturer:
NORYL™
Low smoke production, high heat resistance, very low specific gravity, enhanced resistance to melting and dripping, heat stabilized, impact modified
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low smoke production, high heat resistance, very low specific gravity, enhanced resistance to melting and dripping, heat stabilized, impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HN731A
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HNA055
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HN731SE
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FP5140HF
Manufacturer:
NORYL™
Impact modified, unreinforced blend
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact modified, unreinforced blend
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FP5140HF
Manufacturer:
NORYL™
Impact modified, unreinforced blend
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact modified, unreinforced blend
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HNA033
Manufacturer:
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HNA033
Manufacturer:
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FP5140
Manufacturer:
NORYL™
High flow, Good rheological properties, High heat resistance, Hydrolysis resistance, Very low density
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, Good rheological properties, High heat resistance, Hydrolysis resistance, Very low density
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FNH2160
Manufacturer:
Foamable, Flame retardant
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Foamable, Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FNH2160
Manufacturer:
NORYL™
Foamable, fast cycle time, improved processing, good dimensional stability, low moisture absorption
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Foamable, fast cycle time, improved processing, good dimensional stability, low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EN185
Manufacturer:
NORYL™
excellent impact strength, very low moisture absorption, good dimensional stability, great machinability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent impact strength, very low moisture absorption, good dimensional stability, great machinability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EM6101
Manufacturer:
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FP5140
Manufacturer:
High flow, Good rheological properties, High heat resistance, Hydrolysis resistance, Very low density
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, Good rheological properties, High heat resistance, Hydrolysis resistance, Very low density
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EN265
Manufacturer:
NORYL™
Excellent impact strength, very low moisture absorption, good dimensional stability, great machinability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent impact strength, very low moisture absorption, good dimensional stability, great machinability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FP3060
Manufacturer:
NORYL™
Good dimensional stability, high flow, good rheological properties, high heat resistance, hydrolysis resistance, very low density
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good dimensional stability, high flow, good rheological properties, high heat resistance, hydrolysis resistance, very low density
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FNH2160
Manufacturer:
foamable blend, fast cycle time, improved processing, good dimensional stability, low moisture absorption
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
foamable blend, fast cycle time, improved processing, good dimensional stability, low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EM6100
Manufacturer:
Non-reinforced blend
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more