HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11211 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PA66+SI-MX40 RTP 227 H SI 2 Z
制造商:
None
No Characteristics
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE RTP 200 H TFE 5
制造商:
RTP公司
High impact or impact modified
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE RTP 200 TFE 15
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE_RTP 200 TFE 20
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE_POLIMID LUB A SG TF4
制造商:
None
No Characteristics
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE_RTP 200 TFE 10
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE_TECACOMP® PA66 TF15 natural 4086
制造商:
恩斯inger化合物
Injection Molding
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE_LUVOCOM 1-7384/EG/GY
制造商:
莱沃斯集团
No Characteristics
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 9101 PTFE15
制造商:
ALCOM
heat stabilised,injection moulding grade,easy release (demoulding),improved sliding / wear
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,injection moulding grade,easy release (demoulding),improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE-Z
制造商:
None
No Characteristics
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE-GF33 RTP 205.3 TFE 15
制造商:
RTP公司
注塑成型
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
注塑成型
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE-GF_LATILUB 66-10T G10
制造商:
None
No Characteristics
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE-GF40_TEREZ® PA 6.6 7500 TF 15 GF 40
制造商:
None
Medium viskosity PA66 standard quality
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium viskosity PA66 standard quality
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66/6G/3L1
制造商:
None
No Characteristics
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE-GF30 TEREZ® PA 6.6 7500 TF 15 GF 30 H
制造商:
None
Heat stabilized
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE-GF30 TF15 HI natural 3133
制造商:
None
Injection Molding
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE-GF30 PENTAMID A GV30 H TF15 black
制造商:
None
No Characteristics
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE-GF30
制造商:
None
No Characteristics
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 910/8 GF30 PTFE15
制造商:
None
improved sliding / wear,high heat stabilised
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,high heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 9101 GF30 PTFE20
制造商:
ALCOM
improved sliding / wear,heat stabilised
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Total 11211 materials | Scroll down for more